Creating the anchor connection into concrete for the stair macro

Creating the anchor connection into concrete for the stair macro video

 

I have created a stair specific for my company or clients requests. How do I anchor it to TOC? Additionally, what toolset is available to achieve this?

There are tools allocated for this very scenario in Advance Steel, Stair Anchor Angle and Stair Anchor Base Plate. 

Creating the anchor connection into concrete for the stair macro 1

You can orient the placement of the UCS to determine where the top of concrete.

First you need to change settings in the stair macro.

For this example, the bottom landing and Step bottom step size “same as other steps” should be unchecked.  

Creating the anchor connection into concrete for the stair macro 2

This insures the separation of the general treads from the bottom tread. You can then change the bottom tread without affecting the other treads.

You can remove the bottom landings by unchecking the Create front and rear landings from the Bottom landings Proof panel located on the Landings category of the stair macro. 

Creating the anchor connection into concrete for the stair macro 3

On the Landings category of the stair Uncheck Create first tread from the Bottom landings prof sub panel. 

Creating the anchor connection into concrete for the stair macro 4

Change the Step- bottom tread type accordingly. This example uses Type 19. 

Creating the anchor connection into concrete for the stair macro 5

Now your ready to add the anchor…

Click this image below to watch the video:

 

 

How to add a custom length to your US Normal Ancho...

Related Posts

Autodesk gold partner 250